מתג Luminex 01 00052-POE Gigacore 26i with PoE
27605ה- GigaCore 26i הינו מתג אינטרנט מקצועי וורסטילי מבית Luminex הנועד להתמודד עם הדרישות המשתנות של עולם התאורה, הוידיאו והסאונד בדרך ידידותית וקלה למשתמש. המתג מכיל 24 מחברי shielded Neutrik Ethercon Gigabit, 6 חיבורי SFP לחיבור כבלים אופטיים ותוכנת WEB לקינפוג אופציות שונות. המתג תומך במגוון פרוטוקולים:
PoE עד W300
Dante
Ethersound
REAC
sACN
ArtNet
MANet2
IEEE 802.1p CoS (Class of Service)
DiffServ (DSCP)
IEEE 1588 PTP V2
פרטים טכניים נוספים:
Connectivity
| Network: | 24 x 10/100/1000Mbps shielded copper RJ-45 connectors (including ports 21-24 as shared media) 6 x SFP cages, compliant with 10/100/1000Mbps Mini GBIC transceiver (including ports 21-24 as shared media) 1 x serial RJ45 console port |
| Power: | 1 x IEC inlet |
Switch Features
| Functionalities | RLinkX Groups PoE (26i with PoE only) Profile Manager Controlled fans |
| Ethernet Compliance: | IEEE 802.3, IEEE 802.3u, IEEE 802.3x Flow Control, IEEE 802.3ab Gigabit Ethernet |
| Supported Protocols: | AES67, Art-Net, Dante©, Ethersound©, MANet1&2©, Q-Lan©, REAC©, sACN, and many more ! IEEE 802.1p CoS (Class of Service) QoS (DSCP) PoE+ 802.3at (GigaCore 26i with PoE only) |
| Sound Protocol Compliance: | Yes, low jitter |
| Ethernet Switch Type: | Layer 2/3 – Full non blocking wire-speed switching performance |
| Memory: | 4Mb |
| MAC Address Table: | 8192 Entries |
| Address Learning / Aging: | Self learning, Auto aging |
| Switching Throughput: | 52Gbps |
| IGMP support: | Yes (V1/V2/V3) |
| IGMP Snooping: | Yes (default : enabled) |
| PoE output (26i with PoE only): | Max 370W to share on all RJ45 ports |
Port Features
| Port Sensing: | Auto negotiation |
| Port Speed: | Copper: 10/100/1000T Fiber: 100/1000BaseX |
| Auto Crossover: | MDI / MDIX (allow to use straight or cross wired cable) |
| Auto Sensing: | Full or Half Duplex (Gigabit is Full Duplex) |
| PoE support (26i with PoE only) | Yes, PoE+ compliant (max. 30W per port) |
Status Report
| Ethernet Port Connection: | Status available throught the mode button and mode LEDs: White LED: Groups assignation Blue LED: RlinkX status Yellow LED: PoE status (26i with PoE only) Off: Dark mode |
| Ethernet Port Speed: | Status available through port speed LED: Orange: 100Mbps link Green: 1000Mbps link |
| Device (Ok): | Status LED (Green / Red LED) |
| PoE (GigaCore 26i with PoE only): | Status LED (Green / Orange / Red LED) |
| RLinkX: | Status LED (Green) |
| Power: | Status LED (Green / Orange / Red LED) |
Management
| Configuration: | Through the built-in web server |
Power Input
| Power Input: | 100-240VA 50-60Hz 0,5 – 0,29A for GigaCore 26i 4,9 – 2,2A for GigaCore 26i with PoE |
| Backup Power Input: | +12VDC – 2,5A on Molex 14 pins connector |
| Backup PoE Input: | -54VDC – 6,5A on Molex 14 pins connector |
| Power Consumption: | GigaCore 26i: Maximum 30W GigaCore 26i with PoE: Maximum 430W |
Environmental
| Operating Temperature: | GigaCore 26i: 0 to +50 °C GigaCore 26i with PoE: 0 to +40 °C |
| Storage Temperature: | -10 to +70 °C |
| Humidity (non condensing): | 5 to 95 % RH |
Physical
| Enclosure: | Metal housing |
| Dimensions (W x D x H): | 482 x 270,3 x 44 mm 19" x 10,64" x 1.73" |
| Packaging: | 547x 425 x 80 mm 21,53" x 16,73" x 3,14" |
| Weight | GigaCore 26i: 3.5Kg GigaCore 26i with PoE: 4Kg |
Additional informations
| Approvals: | CE, IEC 60950-1, EN 60950-1, UL 60950-1 CAN/CSA-C22.2 No.60950-1 FCC Part 15, CFR 47, Class A CAN/ICES-003(A), EN55022 (CISPR22), EN5024 (CISPR24) RoHS Compliance |
| Order Reference: | GigaCore 26i: LU01 00052 GigaCore 26i with PoE: LU01 00052-POE |
| Note: | Luminex LCE operates a policy of continuous development. Luminex LCE reserves the right to make changes and improvements to any of the products described in this document above without prior notice. Specifications are subject to change without notice. |
